Showing posts with label Projects. Show all posts
Showing posts with label Projects. Show all posts

Thursday, February 14, 2013

Tutorial: Organza Petticoat


Happy Valentine's Day (I'm a Legumentine's gal myself but I'm a Hato-nerd so y'know)! Let's talk underthings~. Lolita underthings as in petticoats.

I remembered reading once that organza petticoats were supposed to retain their fluff better than tulle/net ones and also not be as itchy. I had been fighting with a ball of net I called a petti and was tired of it so I experimented with organza and this is what I got. The first organza petticoat I made was my blue one, I made it a few years ago and while it has lost some of it's poof after averaging once a week wear over it's whole life it is still pretty solid. I saw this organza on clearance and fell in love with the color so I figured why not give my blue petti a break and make another one. I've also made a cupcake petti using a similar method and will note the lengths needed to make one in parenthesis.

For this project you will need:
3 1/3yd organza (5 1/4 for cupcake)
1 package of bias tape (2x the width of your organza) (2 for cupcake)
4"xYour waist measurement+3" of cotton or other sturdy but not bulky fabric

This explains juuuust about everything. It's a very simple design but one I thought very hard on since organza frays like a mofo and I knew the key to a long lasting organza petti would be to minimizing that. About sizing, I have a 26" waist and this works very well for me but because of the pleating it could probably go up to 32" without major modifications.

Step 1
Buy 3 1/3yds organza (if using the base measurements, if not just add up your panels), wash and iron it. Remember to either have your iron on a low setting or place a cloth over the organza so you don't melt/burn it.

Step 2
Cut your fabric into panels as shown in the diagram.

Step 3
Pin the selvage/short sides together. The selvage won't unravel which is why you want that for the seams. With one of the base skirt's seams, start and end the seam about twelve inches from the edge like the diagram above. The length of unsewn seam needs to be symmetrical.

Step 4
Iron your seams open. Remember what I said about ironing organza? Yeah, this is what happens if you aren't careful. When ironing the partially not stitched seam, iron the unstitched ends folded back like the rest of the seam.
Step 5
Fold both the base skirt tube and the ruffle tube in half (hotdog style), sandwiching the seams inside and matching them up. Pin the raw edges together and go ahead and run a quick stitch there. It will just makes things way easier and is worth the five minutes it takes (trust me, I've tried skipping, it just causes frustration).

Your back opening will look like this. This is why you're shooting to make the unstitched lengths of that seam symmetrical.

Step 6
Now the time consuming part, pleat the ruffle along the rough/unraveling edge so it is the same width as your base skirt. I like to mark the to be ruffled fabric into four equal sections and figure out what a 1/4th of my needed length is then do each section at a time. It helps to keep it even. Pin your pleats then sew them down with a straight stitch. The organza likes to slip so be careful or else the ruffle tube will be slightly larger than you want. That won't be the end of the world but still, aim for a perfect fit.

Step 7
Now pin your bias tape/ribbon casing over that raw edge. This will keep it from unravelling and also add some body to the petti. Once you have it pinned on then sew it down. It doesn't have to be pretty so don't worry about fighting that bias tape/organza duo of evil.

Step 8
Now for the weird part. We're going to fit the ruffle onto the petticoat skirt. You want the bottom of the ruffle pointing to the waistband/top when you're sewing it on, not folded over or anything but just like the diagram. Pin it on.

Step 9
Chances are it won't be a perfect fit. Luckily it's a petticoat so one of those two pleating options will solve the problem without many issues. Be ready to enact one of those while sewing the ruffle on, the organza is a beast and will change dimensions so one of those pleats will likely be needed.

Step 10
Pleat the skirt. With ruffle attached you're almost done! Pleat the skirt just like the ruffle but this time down to your waist measurement. I make mine 1/2" too short  so there isn't bulk where it would otherwise likely overlap. Your call on that. I also do a box pleat on the front and then have the direction to either side matching it. Again, your call.

Step 11
Iron your 4" strip of fabric into bias tape, just admittedly big bias tape. And yes iron, it will look 20x nicer and be easier. Again, I've tried to be lazy with this before and the 5 minutes it takes to iron it is sooo worth it. You can also fold in the short edges and iron them down too since it'll make finishing those easier.

Step 12
Pin your waistband to the pleated end of your petticoat, making sure there is at least a one inch tab of extra on each end of the unsewn seam which is like your petticoat's fly. I aim the center of my waistband tape at that center front box pleat to make sure there's enough tab on each side of the petti-fly.

Step 13
Button placement. Figure out where you want to put your buttons then sew the buttonholes first. In case your buttonholes are a little off, since adjusting the placement of buttons is way easier than buttonhole placement. I used two buttons since my tabs were a little long.

And you're done! It's really that easier. You could make it with elastic in the waist but I worry that it'd bulk up the waist area and that it might get tangled in the rough edge of the organza which would also occupy the waistband. This kind of petti can be machine washed (machine dry low for best results). It will lose a bit of poof over time but it holds onto a good bit.

Thursday, June 14, 2012

Tutorial: Fixing Elastic That Has Come Loose From One End (bloomer leg edition)

So with ALL of my bloomers being out of commission for one reason or another and my complete inability to sleep recently I did repairs. The torn off button and ripped seam were easy enough fixes but here's a way to fix elastic in a casing should it rip out of one end.

What you'll need:
Seam ripper
Looong tweezers
Sewing materials (ie machine and thread)
Patience
So here's the bloomers, my fav summer bloomers and we are most certainly in summer so I need them.
First use a seam ripper to undo about an inch or two of the casing's stitching right by where the elastic should be anchored. I'm using the tweezers to show the opening I made.
Next shove your tweezers into the casing and scrunch up the fabric on the tweezers 'til you come the where the elastic actually is. If you can't tweeze with the tweezers then rip up more of the seam until you can.
Grab onto the elastic and gently pull it through the casing, bunching up the casing on the elastic away from where you will need to sew.
Pin down the elastic where you want it in the casing and sew over the end. You may want to try two rows of anchoring stitches to make it doubly secure. I have it pulled open here to show you about how much seam I had to rip up to get to the elastic.

Then redo the casing seam (in my case a top stitching) and voila! Fixed bloomers!

Thursday, May 31, 2012

Tutorial: Star Hair Clips (like Chocomint ones)

I've been wanting a set or three of the metallic gold Chocomint star clips for as long as I've known they've existed but I either can't find them in stock or they've been at serious scalper prices which I'm not quite willing to pay. So I figured if I could make all sorts of wacky costumes then surely I could make starclips. And I think I did alright.

What you'll need:

Fabric: Can be a scrap, you don't need much, maybe a 6"x10" square. I have a 1/4 yard and could easily make 5-7 sets if not more.
Thread: I'd suggest against metallic as it isn't as strong and you aren't going to see it anyways. I used tan with my gold fabric since it will blend if seen. Also you'll need thread for the pearl strands, go with something that matches the pearls obviously.
Stuffing: Polyfill, or whatev. Just make sure it is light.
Pearls: For the pearl strings between the stars.
Needle: Even if you're machine sewing for the most part, you'll want a needle to hand sew the backs of the stars, sewing the clips on and doing the pearls strands.
First you'll need a pattern. I just used one of the star decorations I have in my room but to make your own simply draw out what you want at the size you want then and 1/2" all around the border of it. This works for any shape.
Now cut out your fabric (I traced around the edge of the star since it was such slippery fabric). You'll want 4 stars in total.
Match shiny side to shiny side and pin together. You'll have 2 stars ready for sewing!
And sew. I used a machine for this part but you could totes hand sew these.
Now trim the points off the stars, making sure not to cut too close to the thread. This will make turning this right side out easier.
Speaking of turning these right side out, you'll need to cut the center of on side on each star to do this. Pluck at the fabric so it separates then cut it, making the cut as small as possible while still allowing you to pull the fabric through.
Now turn it inside out. I used the looped end of a bobby pin to hook onto the point of the star and help push it out as pointy as it would go.
Now stuff. You want it fairly well stuffed, you can use the loop end of the bobby pin to help get the points stuffed.
Time to break out the needle and thread. Close up the opening you used the turn the star out.
Now sew on the hair clip. You could glue it on but you already have the needle and thread out and then you don't have to worry about the glue melting of getting in your hair on a hot day.
Now that the stars themselves are pretty much done, time for the pearl strands! I used white thread so it would match with the pearls better. Sew a few stitches right beneath the opening end of one star to anchor the strand.
Then add your pearls. I just winged it and stopped when I thought it looked right.
Then sew down on the other star at the spring end. Do at least a few stitches.
Then tie it off.
And repeat for a second string. Make sure it is a different length than the first.
And you're done! Look at that! And for about $5 you've got a set of star clips. :D

Friday, December 30, 2011

Adventures in Sewing: Poofy Sleeves

On the tag it is listed as 'White'. I think I know why it was in the thrift store.

I found a pink blouse in a thrift store awhile back with poofy sleeves done like a bubble skirt. And I fell in love. I bought this blue cotton awhile back (same shopping trip lol) because it was cute and in a fabric store I only get to every couple six months though I had no project in mind for it (which is bad, then it sits around not doing anything) and about a week ago I realized I wanted a lolita-ish shirt dress made out of that fabric with poofy sleeves like that pink blouse. But as I've never done it before I figured I'd make a white blouse from the left over eyelet from my eyelet bloomers and mob cap. It turned out well so I thought I would share a quick tutorial.

Please excuse my mad paint skillz, forgot to take a pic of this part.

Cut out the regular sleeve piece, this will go on the inside so it is needed. Now for the outer part which is the pooftastic part, fold your fabric in half, then fold your sleeve part piece in half and place it a few inches from the fabric fold. Cut it out!


And it only took me 2 hours to get to this point! *dies*

Now sew down the seam and press it. Yes press it. Pressing is the key to good sewing.

This feels so easy!

Slide the inside/smaller part into the larger/outer part so it peeks out just a smidge then pin the together once at the seams. This will give you a guide for how to pleat the outer piece.

Another hour later...

Now start pleating. I do one pleat on one side and then mirror it on the other until they meet at the top/polar from the seam. You'll also want to pleat starting an inch or two away from the seam and make them deeper/bigger pleats as you go. This will help reduce the mass of poof under your arm which makes things more comfortable. Once you've got it nice and slightly tight around the inside piece take out the pin holding the two seams together and slide out the inside piece.

Nothing more zen then the hum of the sewin- holy shit it shot a needle at me! Time to clean the bobbin casing...

Now sew down the pleats. I know you're supposed to do the pins at a 90o angle but I'm used to doing them exactly where my needle needs to go so I know where to sew. Do whichever works for you.

You can already see the poof. It shouldn't look as poofy as mine at this stage since I put waaay too much poof in.

And slide the inner sleeve in and pin it in place.

Tralalala sewin- Goddamn it quit spitting needles at me! I just cleaned your bobbin casing like you wanted!

Sew it together.

I purposely cut and pleated the sleeve so it would have an eyelet border. That's why it took so long.

It'll look like this.

Then flip it inside out, repeat the pleating process on the other end then you can sew that sucker in like a normal sleeve.

Hopefully your shirt is not this short. That's what happens when working with scraps.

And that's (part of) how you get yourself a shirt like this. I used two layers of eyelet in the main body of the shirt to keep a similar opaqueness to the sleeves. And I used the slight bit of the business end of the eyelet I had left to make one of the layers of the double collar.

Also, I have an OotD. Today is a picture release of a new toy and in hopes of it being my favorite character (50% chance) I made a coord based off the basic design of the character.

My Corvette love bleeds into Transformers...

Outfit
Bow: Claire's
Pearls: Glass
Blouse: Offbrand
JSK: Converse One Star
Belt: Offbrand
Leggings: Offbrand
Boots: Offbrand (Kohl's)
Gloves: Offbrand (and lined with rabbit fur, so lovely)

I'm also realizing that my Chanel Dragon lip lacquer may not have been the closest match for the triumphal red I was going for. Whoops.

Edit: He was the one revealed today! Evil universe and therefore red but yay. :3

Saturday, April 16, 2011

A Brief Reprieve From Lolita

Last week I went and saw Jane Eyre and kind of sort of fell completely in love. Michael Fassbender has been on my list of people where if they are in a film, I'm just going to go see it. The man can act. And he didn't disappoint in Jane Eyre.

He is also just the right mix of awesome actor, not handsome and not hideous to be the perfect Mr. Rochester.

I left the theater in a bit of a happy haze which I've not had after a movie in ages (I think the last one was 9, but I'm not sure). Half of that was from the dresses which sang a siren song to me. 'But I've got enough sewing projects' I thought, 'and I don't have the proper under garments'. That evening I downloaded a copy of the book to my kindle and figured it'd be a fun on and off read. Oh yeah, sure. Jane's childhood is a bit less than fun to slog through but it is totally necessary. It establishes who Jane is and what has made her that way. Then Jane gets to Thornfield and we get some powerful scenes. Oh my. Rochester and Jane are so not an ideal relationship and things are weird but somehow it is super enjoyable to read and there is a passion (pronounced in the super hilarious, Italian sportscar way, btw) to their interactions. I finished the book in about five days, finishing it by not sleeping the last night of that because I couldn't put it down.

When I had first left the theater I thought it was an awesome movie and liked Jane as Mia W. portrayed her. After reading the book... I still like both. They are just two different Janes, kind of similar but totally not. Book Jane is a bit more playful and teasing and proud which we are able to get to fully know since it is written from her point of view, as if she was telling us the story in person or in a veeeery long letter. Movie Jane is much more reserved and kind of... timid. Most of it is probably since we don't have Jane commenting on everything but the air that Mia W. gave off just felt more timid and being pulled by the tides. I don't dislike it but I do prefer Book Jane.


The trailer is kind of a terrible example of the movie's quality but it shows the pretty clothes!

In short: Loved the movie (Fassbender should get a freaking award btw), LOVED the book and fell in love with the clothing.

Which is where this post's title comes in. I tried to fight it but within a few days I succumbed to the desire for a Jane Eyre wardrobe. It doesn't help that there was a big clearance at Hancock so I got a lavender/grey stripe shirting, super fine black cotton and some white with black/grey stripe shirting (more Ingram than Eyre but I love white and I didn't see any black taffeta for cheap). The pink fabric I had wanted a corset made out of for ages was also on sale which also helped. Since that style needs a proper corset base.

So, for the next few weeks this blog will pretty much be on field trip to the 1840's. The garments are still beautiful and I've got some hilarious sewing fail stories on my part (wire hangers as boning in a corset for the lol) so I'm sure y'all won't mind too much. I'll also be reviewing Matches and Matrimony, a Pride and Prejudice/Sense and Sensibility/Persuasion crossover visual novel which was posted up on egl last week as well. Oh, and the last two weeks of May and the first two weeks of June will likely be a bit empty on my part. Botcon is the first weekend of June so there's a bit of prep and breakdown concerning that and I've got to get my capstone stuff all settled at that time as well. I'll try and post some interesting things but they may be themed on transforming robots. :D

Thursday, March 31, 2011

Lolita Sewing: Weirdest Materials (and Designs)

"For those of you who sew your own clothing, what’s the weirdest thing you’ve ever made a lolita garment out of? Old bedsheets? Discount fabric with Elvis’ face printed all over it?"

I don’t so much use weird materials as have weird designs. The weirdest materials I have used to date would probably be a tie between:

 
Cheap Pewter Taffeta (weird because taffeta is a train wreck waiting to happen). To make a skirt/bolero set themed off my first car:

 
And...


 
A free t-shirt from Comic Con International, used as part of a skirt. Not the weirdest thing to use it as an applique but I haven’t seen it done in lolita. Also my Tron "User" skirt since I've never seen any other loli use reflective elements (or chicken wire print fabric died so the print is hard to notice) before, lol! Still working on all the stitching on the Green Hornet skirt but I have worn the User skirt out:


As you can see, I'm a bit weird. Eventually I'll make the outfit in my layout but since I won't be going to the MotoGP race at Laguna Seca this year (the same weekend as Comic Con, WHY?!) it is low on the list.